Email:elliewangled@chinacytech.com Shanghai Ceyuan Industrial Co.,Ltd

Shanghai Ceyuan Industrial Co.,Ltd

Product Categories
Contact Us

Shanghai Ceyuan Industrial (SCI) Ltd.

ADD:Room 901, No.20, Lane777, West Guangfu Road, Putuo District, Shanghai, China. 

Contact: Ellie Wang

TEL: +86-573-82753308

Mobile: +8618042017693

FAX: +86-573-82753302

E-mail: elliewangled@chinacytech.com

Website: www.cyledlight.com


Indoor LED Fixtures Development And Promotion

Indoor LED Fixtures Led in the outdoor lighting engineering application has been very common, but in the interior lighting engineering application is in the preliminary stage, this is also because the indoor LED lighting products are too few, lighting designers suffer from choice, Indoor LED Fixtures and to the promotion of indoor lighting set up obstacles. Personal view, indoor LED lighting products development and promotion should focus on the following three aspects:

The traditional lamps and lanterns used in indoor lighting are numerous, such as tube lamps, Indoor LED Fixtures spotlights, grille lights, lanterns and chandeliers, which make up the two major fields of commercial lighting and home lighting, leading the direction of indoor lighting, and currently used in indoor lighting LED products are mainly LED cup lights, led floor tiles and other decorative lighting, Indoor LED Fixtures other common traditional lamps are rare LED light source application, but this piece of the market's huge potential, with the LED luminous efficiency and price reduction, Who first developed serialization products, who will seize the market opportunities.

One of the biggest advantages of LED is easy to control. and can cluster control, in some of the need for programmable power, led intelligent products can provide a series of solutions, Indoor LED Fixtures contains three primary colors LED lamps and a microprocessor intelligent LED lighting products, configuration DMX512 Communication protocol can be run on the ether, which provides a convenient for the intelligent management of indoor lighting, but also to dilute the use of LED lighting led to the initial cost of the disadvantage of too high.


Illumination, having undergone a series of evolutions, is slowly becoming a fashion, humanized lighting products become the first choice for people, and LED lighting lamps small size, unlike the traditional light source has a glass shell, and light easy to control, in the appearance of the user-friendly design of the lamp LED lamp manufacturers unlimited play space.

Although the LED light source is not as good as some traditional light efficiency, Indoor LED Fixtures but because the LED light emitting direction is strong, the utilization rate is high, so as long as through reasonable optical processing, maximize the use of its luminous flux, in terms of illuminance, LED can achieve functional lighting requirements.


Test the illumination of the 3WLED and 35W halogen cups under the same conditions. Within 3 meters of the center of the LED light source than halogen lamp cup is much higher, in practical applications, Indoor LED Fixtures the lamp cup of common lighting range in 1-3 meters, 3WLED light lighting effect is significantly better than 35W halogen lamp, this is mainly because halogen lamp not good use of its luminous flux.


LED Lighting market Business opportunities, the development of a broad space. LED lighting application has been from the past outdoor landscape lighting led development to indoor lighting applications. According to analysis in the next five years led indoor lighting development will have an exponential growth trend. Its output will be as high as $ tens of billions of in 2011. In particular, the European Union pioneered the ban on incandescent bulbs in 2009, and the issue of energy conservation has attracted much attention, creating a huge market opportunity and optimism for led interior lighting.

The development of high-power LED lighting fixtures depends on two elements: one is the chip itself, the other is the lighting technology, including heat dissipation, Indoor LED Fixtures optics, drive. First is the chip, at present, LED chip technology is the key to the development of substrate materials and epitaxial growth technology. Base materials from the traditional sapphire materials, Indoor LED Fixtures silicon and silicon carbide, to the development of zinc oxide, gallium nitride and other new materials. Whether it's a high power chip for key lighting and overall lighting, or a low-power chip for decorative lighting and some simple auxiliary lighting, the key to technology upgrades is how to develop more efficient and stable chips. In just a few years, with the help of a series of technical improvements, Indoor LED Fixtures including chip structure, surface coarsening and multi quantum Well structure design, LED has achieved a great breakthrough in optical efficiency. Thin-film chip technology is the core technology in the production of Ultra bright LED chip, which can reduce the optical output loss of each side, Indoor LED Fixtures and can make more than 97% of the light output from the front by using the reflective surface of the bottom. This not only significantly improve the light efficiency of the LED, but also for the lens design to create a superior convenient conditions.


Copyright © Shanghai Ceyuan Industrial Co.,Ltd All rights reserved.
QR Code