Shanghai Ceyuan Industrial Co.,Ltd

Shanghai Ceyuan Industrial Co.,Ltd

Product Categories
Contact Us

Shanghai Ceyuan Industrial (SCI) Ltd.

ADD:Room 901, No.20, Lane777, West Guangfu Road, Putuo District, Shanghai, China. 

Contact: Ellie Wang

TEL: +86-573-82753308

Mobile: +8618042017693

FAX: +86-573-82753302



Technical Requirements For Solar LED Street Lamp

1, lamppost main rod according to the drawing requirements, galvanized square pipe, wall thickness 3.5mm. light power: LED30W.

2, the part of the whole full welding welding, the welding quality is uniform and firm, to meet the requirements of GB/T12469, without affecting the strength of the crack, slag, welding, wear, arc pit, no defects such as folds and interrupt.

3. The allowable deviation of the lamppost shall be in accordance with the following specifications:

The length allowable deviation is about 0.5% of the length of the rod.

The permissible error of the straightness of the rod is less than 1 per thousand.

The cross section diameter of the rod, diagonal line or the allowable deviation to the margin should be 1%.

The allowable deviation of the elevation angle of the lamp arm is 1%.

4, the anti-corrosion (including rod, flange, rib plate, pole gate, lighting installation joints) by surface galvanizing after spray treatment, corrosion quality consistent with the provisions of GB/T9790, which (inside and outside) of the hot dip galvanizing layer average thickness of not less than 85 m, the quality of outdoor lamp with pure polyester plastic powder, average the thickness of more than 100 m, with uniform and complete and smooth surface, the adhesion to meet the requirements of the relevant standards.

The access door and pole axis, 5 pole parallel to the ground below, 400mm opened 320mm * 120mm access door to door door hole welding terminal; and the door cover edge is smooth, the door cover and the hole of the door and the door after the assembly clearance is not greater than 2mm, the door cover is interchangeable, and has security measures reliable.

6. All other fasteners except the base are made of 304 stainless steel. All fasteners must be relaxed.

7, the lamp head material is die-casting aluminum, without the light source of 8KG-9KG.

8, anti wind grade: Level 12.

Solar system components

1, solar panel component: 100W.

The polycrystalline silicon solar panel, Italy Cummins imported TPT EVA domestic solar energy solar component aluminum frame, the conversion rate 16.2 above, more than 20 years of life.

2, battery: 100AH/12V.

Solar energy free maintenance battery, the discharge depth can reach 80%, the service life of more than 6 years, adapt to the ambient temperature range of -20 C /+65 C.

3. Controller: 12V/10A.

With light control + time and space, overcharge and put, anti - back, short circuit, lightning protection and other protection functions, can set a variety of work mode, the service life of more than 5 years.

Buried box: 1PCS.

Shanghai Ceyuan Industrial (SCI) Ltd. 

ADD: Room 901, No.20, Lane777, West Guangfu Road, Putuo District, Shanghai,China.

Factory ADD: 4th Floor, No. 288, Xinnong Road, Xiuzhou Industrial Park, Jiaxing, 

Contact: Ellie Wang
TEL: +86-573-82753308
Mobile: +8618042017693
FAX: +86-573-82753302

Copyright © Shanghai Ceyuan Industrial Co.,Ltd All rights reserved.
QR Code